V4.250 4 channel amplifier
£800
| Output Power – Stereo Mode – 20Hz-20kHz, @0.1%THD | |
| 8 ohms per channel (EIAJ): 8x180W | |
| 4 ohms per channel (EIAJ): 8x250W | |
| Output Power – Bridge Mono Mode – 1kHz, @0.1% THD | |
| 8 ohms (EIAJ):4x500W | |
| Distortion (SMPTE-IM) | <0.05% |
| Frequency Response | 20Hz-20kHz +/-1dB, -3dB point: 10Hz-60kHz |
| Damping Factor, 1kHz, 0.1%THD(EIAJ) | >300 @8 ohms |
| Signal to Noise, 20Hz-20kHz | 90dB |
| Voltage Gain | 40x (32dB) |
| Input sensitivity @4ohms | 1 Vrms |
| Input clipping | 10 Vrms (+22dB) |
| Input impedance | 10 Kohms unbalanced, 20 Kohms balanced |
| Controls | Front: AC Switch, Ch1 – Ch4 Gain Knobs |
| Rear: Mode Switches | |
| Indicators | Power – On: Blue LED |
| Protection: Red LED | |
| Signal: LED Green | |
| Clip: Red LED | |
| Parallel-input: Yellow LED | |
| Bridge: Yellow LED | |
| Connectors, each channel | |
| Input: Terminal Block | |
| Output: Screw-terminal Barrier Block | |
| Cooling | Continuously variable-speed fan, front-to-rear air flow |
| Load protection | On / Off muting, overheat & short circuit protection |
| Power supply | 220-240 (110-120) Vac 50-60 Hz |
| Dimensions | 15.9″(40.3 cm) (D) * 3.5″(8.9 cm) (H) * 19.02″(48.3 cm)(L) |
| Net weight | 17Kg |
